Standox®
Axalta™ Etch Primer 420
Axalta™ Etch Primer 420
Axalta™ Etch Primer 420 is a two-component adhesion promoter that promotes adhesion and serves as passive pretreatment of metal substrates, especially aluminum and top-grade steel. It must be used as part of a three-layer system.
Features
Product Details
| Type | Etch Primer |
| Substrates | Properly prepared Bare Steel Properly prepared Galvanized Steel Properly prepared Aluminum Cut throughs on Sanded E-Coat Cut throughs on original or old paintwork (except reversible substrates, Example: lacquer) |
Available Sizes
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Quart | 6 | 012500073439 | 1250007343 |
Mixing Instructions
| Components | Parts by Volume |
|---|---|
| Axalta Etch Primer 420 | 1 |
| Axalta Etch Primer Activator 421 | 1 |
Viscosity
15 - 16 seconds at 68°F/20°C, DIN 4
Pot Life
Approx. 8 hours at 68°F/20°C.
Application Instructions
Application
Option 1: Apply 1 medium coat followed by 1 full coat without intermediate flash-off.
Option 2: Apply 2 coats with approximately 5 minutes intermediate flash-off between coats.
Option 2: Apply 2 coats with approximately 5 minutes intermediate flash-off between coats.
Gun Setup & Air Pressure
Refer to technical data sheet.
Dry Time
| Air Dry | Force Dry |
|---|---|
| 30 minutes at 68°F/20°C |
Special Instructions
Safety
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.
Packaging Information
You must be an Axalta Coating Systems authorized distributor to view pricing information. Please Login or contact us to learn more.
LOGIN