Spies Hecker®
A two-component chromate-free aerosol delivers good corrosion resistance and excellent adhesion for direct-to-metal applications. It can be applied over cleaned aluminum, galvanized steel and stainless steel or over appropriately sanded or blasted carbon steel, sanded fiberglass and sanded OEM e-coat primers.
Axalta™ Epoxy 2K 460A Spray is available as an aerosol only.
Product Details
| Type | Primer-Surfacer |
| Technology | Epoxy |
| Substrates | Sanded Bare Steel Sanded Galvanized (cut-through) Sanded Aluminum (cut-through) Sanded E-Coat Original or old paintwork (except reversible substrates, Example: lacquer) SMC, fiberglass, body fillers, polyester putties Over properly sanded primers Under all primers |
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| 14.2 oz. | 6 | 012500080048 | 1250008004 |
Mixing Instructions
| Components : Axalta Epoxy 2K 460A Spray | Parts by Volume |
|---|---|
| Refer to technical data sheet |
Application Instructions
• 2 coats = 0.8-1.2 mil (20-30 micron)
• Apply 1 coat, allow to flash off. Then, apply a second coat to cover.
IR drying may be used to enhance flash off/drying.
Dry Time
| Air Dry | Force Dry |
|---|---|
| Refer to technical data sheet |
Special Instructions
Safety
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.
Packaging Information
You must be an Axalta Coating Systems authorized distributor to view pricing information. Please Login or contact us to learn more.
LOGIN