Montana
Montana Big Sky™ PS5011 2K 2.1 VOC Urethane Primer White
Montana Big Sky™ PS5011 2K 2.1 VOC Urethane Primer White
Montana Big Sky PS5011 is a 2.1 lbs/gal VOC, two-component urethane primer designed to provide high film build, easy sanding and excellent color holdout. Available in three colors, PS5011, PS5012A & PS5015, they may be mixed together to create primer colors that optimize hiding. They are chromate free and can be used as a primer surfacer or sealer. This primer/sealer meets the VOCguidelines for Rule 1156.
Features
- High Film Build
- Minimal Shrinkage
- Primer Surfacer or Sealer
Product Details
| Type | Primer |
| Substrates | Properly cleaned and conditioned steel, aluminum, and galvanized steel PS3008 ViperGrip II Metal Etch Thoroughly sanded OEM Thoroughly sanded and cured paint Cured body filler (the use of stain free body fillers on light colors will reduce the chance of yellowing) Properly sanded fiberglass. |
| VOC | 2.1 lb/gal (252 g/l) |
Available Sizes
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Gallon | 4 |
Mixing Instructions
| Components : High Build Primer | Parts by Volume |
|---|---|
| PS5011 | 4 |
| PS5012B | 1 |
| Zero VOC Reducer Series | 10% |
| Components : Sealer | Parts by Volume |
|---|---|
| PS5011 | 4 |
| PS5012B | 1 |
| Zero VOC Reducer Series | 1 |
Viscosity
N/A
Pot Life
Catalyzed Primer: 1 hour at 75°F/23°C. Sealer: 1½ hours at 75°F/23°C
Application Instructions
Application
AS A PRIMER: Apply over properly prepared surfaces. Apply in single full wet coats, allowing 5 -10 minute flash between coats. For best results, do not apply more than 3 coats. As a Sealer: Apply 1 single wet coat of properly mixed 2.1 VOC Urethane Sealer to create a uniform base. Allow to flash for 30 – 45 minutes before applying topcoats.
BRUSHABLE/ROLLABLE OPTION: Mix according to directions. Apply 1 even coat of 2.1 VOC Urethane Primer, making sure to cover the repair area completely into the featheredge. If a 2nd coat is applied, allow a 5 -10 minute flash between coats. Apply the 2nd coat within ¾ inch of the first coats outer edge. For best results, do not apply more than 3 coats.
BRUSHABLE/ROLLABLE OPTION: Mix according to directions. Apply 1 even coat of 2.1 VOC Urethane Primer, making sure to cover the repair area completely into the featheredge. If a 2nd coat is applied, allow a 5 -10 minute flash between coats. Apply the 2nd coat within ¾ inch of the first coats outer edge. For best results, do not apply more than 3 coats.
Gun Setup & Air Pressure
Refer to Technical Data Sheet.
Dry Time
| Air Dry | Force Dry |
|---|---|
| To sand: Primer: 1 ½ – 2 -hours per coat at 75°F/23°C Sealer: Does not require sanding |
|
| To topcoat: Primer: 4 - 6 hours after sanding. Sealer: 30 – 45 minutes at 75°F/23°C |
Coverage (Ft2)
See Technical Data Sheet
Dry Film Thickness (mil)
See Technical Data Sheet
Special Instructions
Safety
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Safety Data Sheet for safety information. For use by professional, trained painters.
Packaging Information
You must be an Axalta Coating Systems authorized distributor to view pricing information. Please Login or contact us to learn more.
LOGIN