Montana
Montana Big Sky PS3044 Epoxy Primer two-component, chromate-free epoxies are designed for use as medium fill primers that provide optimum adhesion with excellent corrosion protection for bare substrates. Epoxy Primer may also be applied as a sealer to ensure greater inter-coat adhesion, chemical resistance, and color holdout. Epoxy Primer is a full epoxy resin that utilizes a non-induction catalyst, used to increase productivity for automotive and fleet refinishing. If required, Epoxy Primer has a 3.5 lbs/gal VOC catalyst, used for fleet and light industrial applications.
- Good Color Holdout
- Chromate-Free
Product Details
| Type | Primer |
| Substrates | • Properly cleaned and conditioned steel, stainless, aluminum, galvanized steel, copper, and brass. • Thoroughly sanded OEM and cured paint. • Cured and sanded body filler. • Sanded Fiberglass and SMC. • Properly prepared plastic. Note: Do Not use over soluble substrates, DTM, Acid Etch Primer, lacquer primer or lacquer finishes. |
| VOC | 4.6 lbs/gal (551 g/l) |
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Quart | 12 | ||
| Gallon | 4 |
Mixing Instructions
| Components : Normal Build | Parts by Volume |
|---|---|
| PS3044 | 1 |
| PA3040E or PA3040V | 1 |
| Components : Primer-Sealer | Parts by Volume |
|---|---|
| PS3044 | 1 |
| PA3040E or PA3040V | 1 |
| TH035/TH036/TH037 | 1/4 |
Application Instructions
Apply in single wet coats, allowing 15 minute, flash between coats. Apply 1 - 2 coats, depending on desired film build. A light coat of body filler may be applied over 1 coat of Epoxy Prime™ after 2 hours at 75°F/23°C. If two coats of Epoxy Prime™ are applied, wait overnight before applying filler.
SEALER APPLICATION
Apply 1 single wet coat of Epoxy Prime™ reduced as a sealer, to create a uniform base. Allow to flash for 45 - 60 minutes at 75°F/23°C before applying topcoats.
Dry Time
| Air Dry | Force Dry |
|---|---|
| To sand Primer: Best Overnight | |
| To topcoat Primer: 1 hour per coat to 24 hours at 75°F/23°C Sealer: 45 minutes per coat to 6 hours at 75°F/23°C |
Special Instructions
Safety
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Safety Data Sheet for safety information. For use by professional, trained painters.
Packaging Information
You must be an Axalta Coating Systems authorized distributor to view pricing information. Please Login or contact us to learn more.
LOGIN