Cromax
2580CR™ CHROMATE EPOXY DTM PRIMER
2580CR™ CHROMATE EPOXY DTM PRIMER
A two-component, non-sanding primer with excellent corrosion resistance and adhesion for direct-to-metal applications. It is ideal for sandthrough repairs as a direct to metal applied to sanded or blasted steel, well cleaned aluminum, and galvanized or stainless steel without sanding.
Features
- Bare Metal repairs
- Direct-to-metal application
- Direct-to-metal application
Product Details
| Type | Primer-Sealer |
| Technology | Epoxy |
| Substrates | OEM replacement parts Properly sanded or blasted steel Properly cleaned or sanded aluminum, galvanized steel, or stainless steel Properly sanded SMC/fiberglass/body fillers/polyester putties Under all Axalta primers |
| VOC | 4.6 lb/gal (550 g/l) category compliant |
Available Sizes
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Gallon | 012500272702 | 01250027270 |
Mixing Instructions
| Components | Parts by Volume |
|---|---|
| 2510S™ | 2 |
| 2503S™ / 2505S™ / 2507S™ / 2509S™ | 1 |
Viscosity
18-20 seconds in a Zahn #2 cup
Pot Life
9 hours at 70°F in a sealed container
Application Instructions
Application
Apply 1 medium-wet coat
Gun Setup & Air Pressure
Refer to technical data sheet
Dry Time
| Air Dry | Force Dry |
|---|---|
| To nib sand: 30-60 minutes | Cycle time: 30 minutes at 140°F |
| To topcoat: 20-30 minutes (1 coat) |
Dry Film Thickness (mil)
0.8-1.1
Special Instructions
Safety
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.
Packaging Information
You must be an Axalta Coating Systems authorized distributor to view pricing information. Please Login or contact us to learn more.
LOGIN