Cromax
PLAS-STICK® 2330S™ PLASTICS ADHESION PROMOTER
PLAS-STICK® 2330S™ PLASTICS ADHESION PROMOTER
A green-gray adhesion promoter designed to enhance the performance of Cromax™ products on unprimed polyolefin or non-polyolefin plastic parts.
Features
- For non-polyolefin
- Adhesion promoter
- For unprimed polyolefin
Product Details
| Type | Plastic Adhesion Promoter |
| Substrates | Unprimed rigid, semi-flexible or flexible automotive plastic parts |
| VOC | 7.0 lb/gal (840 g/l) category compliant |
Available Sizes
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Quart | 6 | 012500272665 | 01250027266 |
Mixing Instructions
| Components | Parts by Volume |
|---|---|
| 2330S™ | Ready-to-spray |
Pot Life
Indefinitely
Application Instructions
Application
Apply 1 medium-wet coat beyond the entire repair area. After the recommended dry time, Plas-Stick® 2330S™ Plastic Adhesion Promoter will still be tacky. Follow with the appropriate primer or topcoat.
Gun Setup & Air Pressure
Refer to technical data sheet
Dry Time
| Air Dry | Force Dry |
|---|---|
| To primer: 25 minutes | Cycle time: 15 minutes at 140°F |
Coverage (Ft2)
240
Dry Film Thickness (mil)
0.35-0.5
Special Instructions
Safety
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.
Packaging Information
You must be an Axalta Coating Systems authorized distributor to view pricing information. Please Login or contact us to learn more.
LOGIN